A simple fair booth can be made from PVC pipe.
Maximize time and space with a low-cost and lightweight fair booth made from PVC. Readily available at any hardware retailer, PVC pipe is easy to assemble with prefabricated connectors that require no tools to construct. A PVC booth frame can be constructed in minutes, allowing users to focus their time and energy inside the booth without accounting for cumbersome set-up and take-down. The removable covering makes the basic PVC frame very versatile.
Instructions
1. Fit a T connector onto the ends of a five-foot-long pipe segment. The middle connector opening should face upward.
2. Push a two-inch piece of pipe into the remaining flat opening of the T connectors.
3. Insert a 45 degree elbow connector onto the end of the two-inch pieces. The elbows should angle toward you.
4. Place a two-and-a-half foot pipe segment into the elbow connector openings. Place a T connector on the end, facing upward.
5. Repeat steps 1-4 to create an identical frame segment.
6. Insert the eight-foot pipes into each upward T connector opening of the first frame segment.
7. Fit the second frame segment over those pipes. The second frame segment should parallel the lower assembly.
8. Stretch fabric over the frame panels, using snap clamps to hold the fabric in place. Choose whatever fabric you desire for a background.
9. Hang signs and promotional materials on the fabric by placing adhesive Velcro strips on the fabric and promotional material.
10. Place a table against the backdrop. Use a complementary colored tablecloth over the table.
Tags: frame segment, booth made, booth made from, connector onto, connector opening, elbow connector
