Sunday, March 2, 2014

Hook Up A Dryer In A Mobile Home

Installing a dryer in a mobile home is much the same as installing one anyplace else. The real trick is making sure the mobile home has the infrastructure to safely install a dryer; something you can usually assume with a non-manufactured home. For your home and family's protection, make sure your mobile home is safe for your dryer and to install it appropriately.


Instructions


Safety Check


1. Check the owner's manual for your dryer to determine how much power it needs to draw. Confirm that your mobile home's electrical system is rated to handle that much power safely.


2. Confirm that your mobile home is set up to accommodate gas for a gas dryer. If you haven't used that part of your gas system, call the gas company to check it for leaks before installing.


3. Jump up and down on the floor where you plan to place your dryer. It's more than likely that you outweigh your dryer by 30 pounds or more. If the floor seems to give or sag dangerously, don't set up the dryer until you've seen to repairs or reinforcement of your floor.


Installation


4. Install your ventilation duct into the wall output. In most models, this takes only a screwdriver.


5. Move the dryer into your utility room (or wherever). If moving it is difficult, try setting it on an old blanket or piece of carpet and drag it from place to place.


6. Turn off the power leading to the room where you want to install the dryer. Because of this step, it's usually better to install your dryer during daylight hours.


7. Plug in your dryer's gas line, if applicable.


8. Plug in your dryer's power cord.


9. Turn the power to your utility room back on. Test the dryer.


10. Slide the dryer into position.


Tips Warnings


Most mobile homes come with a specific place for a washer and dryer to go, wired appropriately and with a ventilator hole already cut. If yours does not, remodeling will be required to set up an area safely.


Dryers draw a lot of power, enough to kill you. Be sure the power is off before installing or uninstalling your dryer.








Related Posts:




  • What Do I Need To Hook Up The Ice Maker In A Mobile Home

    If your refrigerator is equipped with an ice maker, you'll need a few supplies to get it connected in your mobile home.Most new refrigerators come with a built-in automatic ice maker. If you have...


  • Hook Up A Mobile Home To An Electrical Source

    Trailers and mobile homes can plug directly into a power grid or use a generator.A mobile home can have all the conveniences that electricity, lighting and appliances offer simply by plugging the...


  • Do It Yourself Mobile Home Plumbing

    Plumbing a mobile home is different than conventional homes.Mobile home plumbing is very different from conventional home plumbing. First, different piping is used. Secondly, there are many differ...


  • Hook Up Mobile Home Plumbing

    Hook Up Mobile Home PlumbingConnecting your mobile home's plumbing may present some challenges. The most import thing to remember is that a mobile home is prone to much more movement than a tradit...


  • Fix Up Your Mobile Home

    There are many ways you can fix up your mobile home, and most of them don't have to be expensive. You can update your mobile home's look and fix almost any problem on a tight budget yet still make...