Driving without working tail lights is dangerous.
Driving your Mazda MPV minivan with burnt-out tail lights is dangerous for everyone on the road, including you. Avoid an accident by changing them as soon as they stop working. Regardless of the year MPV you drive, the instructions for changing a tail light is the same.
Instructions
1. Unscrew the two bolts holding the tail light assembly with a Philips screwdriver. The bolts are located on the assembly on the outside of the vehicle.
2. Pull the assembly out of the car. If you are replacing bulbs in the driver's side assembly, pull the assembly out to the left. For the other side, pull it out to the right.
3. Twist the socket with the burnt-out bulb counterclockwise and pull it out of the assembly.
4. Pull the bulb out of the socket.
5. Push the new bulb into the socket.
6. Reinsert the socket into the assembly and turn clockwise to secure.
7. Reinstall the tail light assembly and screw in the two bolts.
Related Posts:
Change The Brake Lights In A 1995 Mazda Mpv
The brake light bulbs on the 1995 Mazda MPV van are located in the combination light or taillight assembly on the rear of the van. Using a dual filament 1157 bulb, the brake lights and the taillig...
Replace A Brake Or Tail Light In A Ford Explorer Expedition Excursion
This is a 2006 Expedition, but it will give you a basic gist.Changing a tail light or even replacing a broken lens on the rear of your Ford car or SUV is very simple, and you only need a cross tip...
Change A Tail Light Bulb On Your Ford Explorer
Change your tail light bulbs as soon as they die.When the bulb in your tail light goes out, replace it as soon as possible. Fortunately, changing the bulb is no harder than it is on any other Ford...
